Preventive maintanace in toshiba estudio 18

[copyalbania]

Hello,

I am stuck in a toshiba estudio 18 how to clear the massage " Preventive Maintenance" .. i changed all drum, cleaning blade and developer but i saw how to clear and i did not find any document or service manual. Can somebody help?

[Acme]

Re: Preventive maintanace in toshiba estudio 18

08-251 sets #of copies to call for pm
08-252 clears pm count

[copyalbania]

Re: Preventive maintanace in toshiba estudio 18

08-251 sets #of copies to call for pm
08-252 clears pm count

Unfortunately it has no numbers only five buttons and no numbers that is why i can not rest the preventive maintenance.

Any idea?

[drolfe@webmail.co.za]

Re: Preventive maintanace in toshiba estudio 18

Hello,

I am stuck in a toshiba estudio 18 how to clear the massage " Preventive Maintenance" .. i changed all drum, cleaning blade and developer but i saw how to clear and i did not find any document or service manual. Can somebody help?

i have never worked on the toshiba 18 but this is from the manual
After preventive maintenance, set the value of setting code"252" (Current value of PM counter
Display) to "0".
* This turns off the "CALL FOR SERVICE" symbol.

[drolfe@webmail.co.za]

Re: Preventive maintanace in toshiba estudio 18

i have never worked on the toshiba 18 but this is from the manual
After preventive maintenance, set the value of setting code"252" (Current value of PM counter
Display) to "0".
* This turns off the "CALL FOR SERVICE" symbol.

this is how to get into test mode
[Clear/Stop]
[POWER] [Arrow keys]
/[OK]*
Code
[START]
[Digital keys] *
Adjust a value
[OK]
Stores
value in SRAM
[Clear/Stop]
Does not store
value in SRAM
[POWER]
OFF/ON
* Press [Clear/Stop] to clear last one digit.

[bobbyshan]

Re: Preventive maintanace in toshiba estudio 18

TOSHIBA E STUDIO 18
TIME FOR MAINTENANCE RESET MODE
hold [Clear/Stop]
[POWER ON]
<<<SERVICE MODE>>>
[Arrow keys] FOLLOW THIS STEP [ UP,LEFT,DOWN,RIGHT ]
PRESS/[OK]*
Go to
SETTING MODE
PRESS OK
Enter this Value [ 251 ] PRESS ENTER
CHANGE ALL VALUE [ 000000000 ]
Hit ENTER/OK
Done!!!
GOODLUCK!!!