toshiba e studio 350 turn to toshiba e studio 450

[Guest]

Is it possible making toshiba e studio 350 turn to toshiba e studio 450???????????

[buuluu]

Re: toshiba e studio 350 turn to toshiba e studio 450

You do updating my FW which I sent to you. When you test PCL font, the machine displays E 450. Do you want to change model 350 to 450 for high price?
Did you call me on April, 5th 2014?

[sdrawkcab]

Re: toshiba e studio 350 turn to toshiba e studio 450

Is it possible making toshiba e studio 350 turn to toshiba e studio 450???????????

Replace the front door.

[emujo]

Re: toshiba e studio 350 turn to toshiba e studio 450

I want to turn my 73 Pinto into a '14 Mustang. Can you send me the firmware for that too? Emujo

[esam ramadan]

Re: toshiba e studio 350 turn to toshiba e studio 450

I want to turn my 73 Pinto into a '14 Mustang. Can you send me the firmware for that too? Emujo

open your email inbox

[Riyadh hossain]

Re: toshiba e studio 350 turn to toshiba e studio 450

All of you are wrong. The only way to turn e350 to e450 is................1) you have to add a resistor( resistor no R 281)
e 352 to e452 2) use same type resistor (resistor no R282)

[buuluu]

Re: toshiba e studio 350 turn to toshiba e studio 450

You say you only add a ressitor R 281 to change from E 350 to 450? where is It? on system board or LGC board? In Viet Nam , someone only do two things: first change the front cover and scarch the stamp of machine. Second do updating the last version FW. Finally test the PCL font, machine prints test page E 450. The custumer don't know machine really is E 350. I don't like to do this. It's not good.

[Mr Spock]

Re: toshiba e studio 350 turn to toshiba e studio 450

speed is controlled on the system and logic pwb. Upgrading firmware will not work. You will need both of these pwb's to do this. You may also need the nvram chip as well.

[Riyadh hossain]

Re: toshiba e studio 350 turn to toshiba e studio 450

the resistor is located in the back side of LGC board,NEED no firmware,no NVRM,no sys board, no power board. I do it about in 50 copier.After adding a resistor pcl font list show toshiba e studio 450/452, yea It is wrong , when you sell e 350/352 as a e450/452. but If I increase copy quantity by discussing with customer is it wrong?????????????????????? pls ans

[sdrawkcab]

Re: toshiba e studio 350 turn to toshiba e studio 450

the resistor is located in the back side of LGC board,NEED no firmware,no NVRM,no sys board, no power board. I do it about in 50 copier.After adding a resistor pcl font list show toshiba e studio 450/452, yea It is wrong , when you sell e 350/352 as a e450/452. but If I increase copy quantity by discussing with customer is it wrong?????????????????????? pls ans

What a load of s$#t