NEED SERVICE MANUAL e255-455

[MUMMIM]

Hi !

My photocopy machine (e455) show "CDF0" . i had a service handbook but i haven't service manual so i don't know what is the "MOT2" and where is it?

send me the link download it pls. my email: trieuphongvnn@gmail.com

thanks all !

[canonbundy]

Re: NEED SERVICE MANUAL e255-455

Hi !

My photocopy machine (e455) show "CDF0" . i had a service handbook but i haven't service manual so i don't know what is the "MOT2" and where is it?

send me the link download it pls. my email: trieuphongvnn@gmail.com

thanks all !

CDF0 is a Finisher Error, check if Tray/s lifting ok & not stuck - disconnect Finisher & make sure M/C operates ok?

[stockman123]

Re: NEED SERVICE MANUAL e255-455

jusk try changing the trans belt clean and replace the trans belt blade. Should take care f the problem

Hi !

My photocopy machine (e455) show "CDF0" . i had a service handbook but i haven't service manual so i don't know what is the "MOT2" and where is it?

send me the link download it pls. my email: trieuphongvnn@gmail.com

thanks all !