e studio 306 mj1031 finisher install

[Acme]

getting a c580 error after installing a finisher on this for resale ive tried changing 08-4548 but no difference, am I missing something?
Thanks

[Luther]

Re: e studio 306 mj1031 finisher install

306 uses mj1032

[Luther]

Re: e studio 306 mj1031 finisher install

finisher options for the 306 series-
Job Separator MJ5004
Work Tray KK4550
Bridge Kit for Finisher KN2520
50-Sheet Inner Finisher MJ1032
Saddle-Stitch Finisher (low capacity) MJ1033
2 or 3 Hole Punch Unit for MJ1032 MJ6007
2 or 3 Hole Punch Unit for MJ1033 MJ6008

[Acme]

Re: e studio 306 mj1031 finisher install

Well that answers that question! thanks

[canonbundy]

Re: e studio 306 mj1031 finisher install

There were Finisher Upgrade Jigs available for earlier Models- ie. the MJ-1024 for a 281C was upgradable to an MJ1030 to suit a K2 or MASH (2500/3520 series).

I'm out of Toshiba now but maybe the other guys might know?