eStudio 6560c close right side duplex cover indicated...

[Logged-on]

The copier keeps blowing F202 on the power supply board, after replacing the fuse, the machine goes to the ready screen for about a second, then the message "close right side duplex cover" appears. We've tested the safety switches, and they appear to be working properly. On the SM index it indicates everything from the toner motors to drum chargers.

If anyone can help with with this problem, your input would be appreciated.

Thanks in advance,

Marc

[dariel89]

Re: eStudio 6560c close right side duplex cover indicated...

Replace the P/S

[Logged-on]

Re: eStudio 6560c close right side duplex cover indicated...

Thanks for the reply, turns out the laser unit fan harness was right behind the hole to secure the pin for the finisher, so the screw went right through the harness, causing the f202 to blow every time the duplex cover was closed.

I didn't realize Toshiba publishes a flow chart that gives the procedures for checking blown fuses, once that was discovered, the problem became manageable