Model 600 and 553 throwing toner out front cover

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SirSteven
    Junior Member
    • Jun 2014
    • 5

    #1

    [Misc] Model 600 and 553 throwing toner out front cover

    I have a Toshiba 553 and a 600. Both machines are leaking toner. The recovery system is working I replace the 600 it was a mess. Toner all over the front I put in the 553
    and its doing the same thing. OEM toner. HELP Why two machines doing the same thing?
  • sorin1965
    Junior Member
    • Jul 2014
    • 5

    #2
    Re: Model 600 and 553 throwing toner out front cover

    Hello!
    I'm new to this community, but old in this field.
    How old are your machines?
    Toner recovery blade, by ageing becomes stiff. Even if it looks intact and with no curls, it is no longer attracted to the drum, causing toner spill.
    Replacing it might be tricky. Good luck!

    Comment

    • didi2005
      Trusted Tech

      250+ Posts
      • May 2011
      • 401

      #3
      Re: Model 600 and 553 throwing toner out front cover

      U can also clean up the toner drive n toner recycle unit...
      Make sure all the motor n gears r working...

      Comment

      • canonbundy
        Senior Tech

        500+ Posts
        • Jun 2012
        • 607

        #4
        Re: Model 600 and 553 throwing toner out front cover

        More than likely the Sensor Wipers in the Toner Hopper & the Developer Units are perished & not doing their job/s.

        Comment

        Working...