[Misc] Toshiba E-Studio 720 Copier

[RonMac]

How do you clear the display message that reads Time for Periodic Maintenance? Thanks for any help.

Ron

[Riyadh hossain]

Re: Toshiba E-Studio 720 Copier

How do you clear the display message that reads Time for Periodic Maintenance? Thanks for any help.

Ron

0+8>>>> 252>>> 0 then enter

[RonMac]

Re: Toshiba E-Studio 720 Copier

0+8>>>> 252>>> 0 then enter

Thank you I will try that. Thanks again, Ron

[buuluu]

Re: Toshiba E-Studio 720 Copier

you access 08 - 252 set to 0 and 08 - 800 set to 0 too. after that you access 05 - 290 doing process control.

[emujo]

Re: Toshiba E-Studio 720 Copier

You're assuming he is actually replacing parts...Performing that last step w/o new consumables will really mess up CQ. Emujo

[RonMac]

Re: Toshiba E-Studio 720 Copier

you access 08 - 252 set to 0 and 08 - 800 set to 0 too. after that you access 05 - 290 doing process control.

Thank you for the information. I will try that. Ron

[RonMac]

Re: Toshiba E-Studio 720 Copier

You're assuming he is actually replacing parts...Performing that last step w/o new consumables will really mess up CQ. Emujo

Yes I am aware that 05-290 can mess up CQ. Thank you for reminding me. Ron