EStudio 256e Help clearing previous customer settings

[Elmo]

Hi all
Hope some one can help me with this i havent done a lot of work on toshiba's
just got a batch of machines in from the trade with LDAP papercut setup on them
can anyone guide me in clearing these machines to factory default
can the settings be reset or will i need to replace system software/Firmware
thanks in advance for any help

[Elmo]

Re: EStudio 256e Help clearing previous customer settings

Thanks for your help coolbeer
now sorted

[haniff12]

Re: EStudio 256e Help clearing previous customer settings

Does any1 know how to reset estudio 4555/3555... got a few off lease machine.
kindly let me know to reset the machine without need to upload firmware

[SalesServiceGuy]

Re: EStudio 256e Help clearing previous customer settings

User Function Hard key.

Admin

Factory Reset.

If a Card Reader was installed and you are seeing a ? on the LCD panel. 08-9132 to clear.

[haniff12]

Re: EStudio 256e Help clearing previous customer settings

User Function Hard key.

Admin

Factory Reset.

If a Card Reader was installed and you are seeing a ? on the LCD panel. 08-9132 to clear.

[SalesServiceGuy]

Re: EStudio 256e Help clearing previous customer settings

A hard plastic button on the copier control panel. Not a button within the LCD panel.

[haniff12]

Re: EStudio 256e Help clearing previous customer settings

A hard plastic button on the copier control panel. Not a button within the LCD panel.

Thanks a lot mate.
will try it out later.

[Phil B.]

Re: EStudio 256e Help clearing previous customer settings

Does any1 know how to reset estudio 4555/3555... got a few off lease machine.
kindly let me know to reset the machine without need to upload firmware

technically since your model number doesn't match the OP's model number you should have started a NEW thread describing the problem and all that you have tried.

Second of all you have dug up a thread that was over 4 years old ( 2 is the preferred amount of time)

there is a big difference between a 256e and the model you mentioned..please review the forum rules to keep you out of trouble in the future:

https://www.copytechnet.com/forums/misc.php?do=vsarules

[haniff12]

Re: EStudio 256e Help clearing previous customer settings

technically since your model number doesn't match the OP's model number you should have started a NEW thread describing the problem and all that you have tried.

Second of all you have dug up a thread that was over 4 years old ( 2 is the preferred amount of time)

there is a big difference between a 256e and the model you mentioned..please review the forum rules to keep you out of trouble in the future:

https://www.copytechnet.com/forums/misc.php?do=vsarules

so sorry regarding that issue.
well noted.