update "Remaining trial days" to 60 days

[totaldesign]

Hi dears
My machine is toshiba 523 copier, on my screen show this msg: "Remaining trial days: 42"! Can i update this value to 60 days by using code?!

[buuluu]

Re: update "Remaining trial days" to 60 days

Hi dears
My machine is toshiba 523 copier, on my screen show this msg: "Remaining trial days: 42"! Can i update this value to 60 days by using code?!

Hi friend
You are using trial printing function? You wait the msg displays " Remaining trial days 1". You do following steps:
1/Access 08 - 203 change from 0 to1 --> enter. Power off
2/Press and hold down 09 power on and wait beep sound, release keys. wait a little ...> enter and wait machine auto shut down.
3/ Access 08 - 673 change 254 to 60...> enter. you choose innitialize. Press and hold down energy saver key wait for shut down. Power on msg display Remaining trial 60 days.
Note: do many times It's easy to make system board error.

[totaldesign]

Re: update "Remaining trial days" to 60 days

Hi friend
You are using trial printing function? You wait the msg displays " Remaining trial days 1". You do following steps:
1/Access 08 - 203 change from 0 to1 --> enter. Power off
2/Press and hold down 09 power on and wait beep sound, release keys. wait a little ...> enter and wait machine auto shut down.
3/ Access 08 - 673 change 254 to 60...> enter. you choose innitialize. Press and hold down energy saver key wait for shut down. Power on msg display Remaining trial 60 days.
Note: do many times It's easy to make system board error.

Thanks for answare.
Yes, I am using trail printing.
Why Should I wait for display msg "Remaining trial days 1" ? Can't use this solution,now?

[buuluu]

Re: update "Remaining trial days" to 60 days

because you have 42 days. May be the machine does not accept/ or you access 08 - 799 force delete to 0. After that you do as steps which I posted to you.

[djames18]

Re: update "Remaining trial days" to 60 days

because you have 42 days. May be the machine does not accept/ or you access 08 - 799 force delete to 0. After that you do as steps which I posted to you.

Hi, I follow your instruction after doing all the steps , the copier enter to a test mode. How can I return to regular home screen. Thank you

[MUMMIM]

Re: update "Remaining trial days" to 60 days

Hi friend
You are using trial printing function? You wait the msg displays " Remaining trial days 1". You do following steps:
1/Access 08 - 203 change from 0 to1 --> enter. Power off
2/Press and hold down 09 power on and wait beep sound, release keys. wait a little ...> enter and wait machine auto shut down.
3/ Access 08 - 673 change 254 to 60...> enter. you choose innitialize. Press and hold down energy saver key wait for shut down. Power on msg display Remaining trial 60 days.
Note: do many times It's easy to make system board error.

buuluu!

i m trieuphongvnn i think you know me, in Vietnam i wrote about this matter over 5 year ago on AHA photocopy forum i don't agree to guide everybody do it, i think you don't ought to write that codes here, because they are secret codes (they don't show in service handbook or all service). when you set those code, the copier will comeback as drand new good (new manufacture) through it was used so much, so there are many latent problem

only my thinking , we should be best to use "Dongle" , it is good for your machine and your job. How about do everybody think ?