s-Studio 255se Lack of response

[Dustp115]

Re: s-Studio 255se Lack of response

After doing the 3+C on the HDD now getting an sram initialize screen but it is not initializing ... how can this be skipped etc

When you get the the screen try hitting the hard key Interupt


Also try SRAM initialization (08-9960) and (08-690)

[drolfe@webmail.co.za]

Re: s-Studio 255se Lack of response

Are you 100% sure that you loaded the correct firmware as it sounds identical to when we had loaded the 4ccd instead of the 3ccd. We had to send the scanner boaed away to get reprogrammed with the jig. Out here the machine have a yellow dot or a red dot in the scanner section the red is 3ccd and yellow is 4ccd

[Riyadh hossain]

Re: s-Studio 255se Lack of response

I think u need to initialize some settings in 0+8 mode 662,665,666,684,685,686,687,690,693,947 it will be ok . recently i solved this problem in es 452