Toshiba E-350 operation panel not working

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dustzona
    Technician

    50+ Posts
    • Mar 2015
    • 83
    #1

    Toshiba E-350 operation panel not working

    Have a customer with a Toshiba that comes to ready, but none of the keys or touch screen work. I was also unable to get into any service modes. It does not show a service code. I have powered it on and off a few times. nothing. Im hoping someones seen this before. thanks
    Tags: None
    • vincent64
      Trusted Tech

      250+ Posts
      • Feb 2008
      • 382
      #2
      Re: Toshiba E-350 operation panel not working

      If you have another mach like it, ES 350 or 450, you can try and swap op panels, don't remember if the 352 or 353 panel's are the same, pull the side cover off the scanner, the wire harness runs there.
      08-690 and reformat the HDD if you can get into service mode, may help also

        Comment

        • dustzona
          Technician

          50+ Posts
          • Mar 2015
          • 83
          #3
          Re: Toshiba E-350 operation panel not working

          I will keep that in mind . thanks

            Comment

            Previous template Next
            Working...