Xerox WorkCentre 7345 - Error Code 009-330 - Help me please !!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tmmpb
    Junior Member
    • Dec 2014
    • 6
    #1

    [Error Code] Xerox WorkCentre 7345 - Error Code 009-330 - Help me please !!!

    When press Start button for copy, XWC-7345 will be show this code [009-330]
    I turn off then turn on, error disappear but when press Start button error code is come back
    .
    Help me for fix it ... Thx you !!!
    Tags: None
    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2362
      #2
      Re: Xerox WorkCentre 7345 - Error Code 009-330 - Help me please !!!

      Originally posted by tmmpb
      When press Start button for copy, XWC-7345 will be show this code [009-330]
      I turn off then turn on, error disappear but when press Start button error code is come back
      .
      Help me for fix it ... Thx you !!!
      Signal from developer motor is missing or bad.

        Comment

        • Jake2o
          Trusted Tech

          250+ Posts
          • Dec 2007
          • 325
          #3
          Re: Xerox WorkCentre 7345 - Error Code 009-330 - Help me please !!!

          Developer Motor Failure:-
          Enter component control and run (009-014) Deve Motor

          Does the developer motor turn?

            Comment

            Previous template Next
            Working...