[Jamming] WORKCENTRE 5687 HCF jamming

[usmjake]

hey guys, need another miracle here. i need to find a gear for the HCF on a 5687. this particular gear sits right next to the top feeder rollers in the HCF. the motor i replaced has the number P/N 127K5412. it also has the number 17PU-H358-F1VM just below the first number and it also has NO. T9815-01 just below that. if any of you fine folk have a pic showing all the gears related to the top feeder of the HCF, i would be much obliged. Thanks again.

[InterfaceP]

Re: WORKCENTRE 5687 HCF jamming

A pic would be fantastic!

[Mukasa]

Re: WORKCENTRE 5687 HCF jamming

hey guys, need another miracle here. i need to find a gear for the HCF on a 5687. this particular gear sits right next to the top feeder rollers in the HCF. the motor i replaced has the number P/N 127K5412. it also has the number 17PU-H358-F1VM just below the first number and it also has NO. T9815-01 just below that. if any of you fine folk have a pic showing all the gears related to the top feeder of the HCF, i would be much obliged. Thanks again.

Hello , why don't you be more specific , this machine has two HCF which one of the two?
The feeder head assymbly is replaced as a kit.

127K56490

Tray 3 and 4 transport motor and drive gear kit (Conductive) (65-87 ppm)

[Mukasa]

Re: WORKCENTRE 5687 HCF jamming

A pic would be fantastic!

Sorry in the sevice manual the picture for the feeder head is not detailed. the picture there is showed as one unit assy.