Xerox 7845 Service mode

[Phil B.]

Re: Xerox 7845 Service mode

Sometimes small particles (waste toner, paper etc) stuck inside the fuser that causes fuser to not heat properly or causes jam and ghost jam

Sent from my SM-G955W using Tapatalk

or you could pull the fuser... blow out all the crap with a blower brush/canned air.

shaking a fuser, if the lamps are weak.. or maybe a screw somehow fell inside the core ( i have seen this so don't laugh ) could break the lamp(s).. causing more down time/$$$

[MrXerox]

Re: Xerox 7845 Service mode

If you have not had any luck you can try a software reset, this can get the machine going temporarily. How to video attatched.

YouTube