xerox wide format 510dp

[walidcharifi]

hi freinds
i have 510dp display " pleas close the fuser door exit "
even though the door is clos ??????
help me

[technogeek2009]

Re: xerox wide format 510dp

There are two interlock switches for the fuser door. One is a magnetic reed switch on the left side. The magnet for this switch is glued to the front fuser door panel and can often become dislodged. The reed switch could be bad, or have become disconnected. Then there is another switch on the right side of the fuser drawer that should be checked. If you don't have a service manual, this could be tricky to troubleshoot.

[walidcharifi]

Re: xerox wide format 510dp

There are two interlock switches for the fuser door. One is a magnetic reed switch on the left side. The magnet for this switch is glued to the front fuser door panel and can often become dislodged. The reed switch could be bad, or have become disconnected. Then there is another switch on the right side of the fuser drawer that should be checked. If you don't have a service manual, this could be tricky to troubleshoot.

thanks very
problem resolved

[technogeek2009]

Re: xerox wide format 510dp

Excellent, thanks for the feedback

[Apouthe Donald]

Re: xerox wide format 510dp

I have a large format Xerox 510P I would replace the lamp (Qwartz) broken during transport of the machine. which parts?

[technogeek2009]

Re: xerox wide format 510dp

The edge lamp is 122K02030, center lamp 122K02020

[Apouthe Donald]

Re: xerox wide format 510dp

that is the lamp of the fuser references? and where I can find?

[technogeek2009]

Re: xerox wide format 510dp

Yes, there are two fuser lamps in the 510, one for heating the center and the other for the edges of the fuser roller. We stock and sell these along most other parts for Xerox wide format systems. Feel free to email me directly at cbyrne@goevergreen.net for pricing.

Carl