If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It may be worth trying to get some help on this site. The advantage is that you'll be able to familiarize technically with the machine, learn how to fix the problem yourself and save lots of $$$$s
It may be worth trying to get some help on this site. The advantage is that you'll be able to familiarize technically with the machine, learn how to fix the problem yourself and save lots of $$$
Thats what I've been doing. If you look at my previous posts, I've been asking for help and no one has the answer. I'd much rather do it myself but at this point, I have no choice but to hire someone to come in and do it for me.
I can't get my network to initialize. It was working before but now its saying "Network Controller not available....notify Machine Administrator."
When I enter in the admin code, the Network System selection box is grayed out. It's asking me to reset it but I can't get into the network settings to reset it.
Any help please?
The reason why you can't get into the network setting is that the communication between the network controller and the main board of the machine is lost/ cut-off.
Check and re-seat the cables at the back of the machine especially the network cable.
if still NO difference, then its an ESS software reload. In this case, you really do need a technician
The reason why you can't get into the network setting is that the communication between the network controller and the main board of the machine is lost/ cut-off.
Check and re-seat the cables at the back of the machine especially the network cable.
if still NO difference, then its an ESS software reload. In this case, you really do need a technician
We checked the cables and reset everything we could. We even tried to reload the software via laptop and usb but we have to get into the settings to enable the usb option and that is grey'd out as well.
We checked the cables and reset everything we could. We even tried to reload the software via laptop and usb but we have to get into the settings to enable the usb option and that is grey'd out as well.
Hi. You might want to replace the HDD. If no difference, it's a network controller failure which will need replacement (unfortunately)
Comment