Finally got my workcentre 3545 going again. I replace the rap and nvm cards with those from another machine. But now my colors are all muddy/muted like watermarks and they are not correctly aligned. I restored nvm from before, but it looks like the alignment/registration info is not held there.
I have a very old pws/diagnav that works with the 32 series and also mostly works with this machine. It will not however do the alignment procedure for the belt or the fine tuning required for registration. I hit start and the machine is non responsive, times out and does not complete the alignment process.
The he message the machine expects from the computer must be slightly different for the 3545. Does anyone have a newer diagnav that works with this machine, or know of some calibration method that could work?
Is is my light color also some part of the calibration or is it just that my toner/drums are so old. This machine has been sitting unused for about 2 years.
thanks
I have a very old pws/diagnav that works with the 32 series and also mostly works with this machine. It will not however do the alignment procedure for the belt or the fine tuning required for registration. I hit start and the machine is non responsive, times out and does not complete the alignment process.
The he message the machine expects from the computer must be slightly different for the 3545. Does anyone have a newer diagnav that works with this machine, or know of some calibration method that could work?
Is is my light color also some part of the calibration or is it just that my toner/drums are so old. This machine has been sitting unused for about 2 years.
thanks