wc 5890 with Finstacker bin home failure 311-461-00

[mdm]

Good morning, I am having the error above. I change firmware to 72.190.165.14201 and replace ejector.
I'm scratching my head, any help please!!!

[Exok]

Re: wc 5890 with Finstacker bin home failure 311-461-00

Bin 1 did not actuate the bin 1 upper level sensor during stacking fault.

The bin 1 upper level sensor controls the height of the tray during normal use. The sensor is in two parts, the transmitter at the front of the tray and the receiver at the rear of the tray.

Possible causes:
Bin 1 upper limit switch
control pwb
bin 1 encoder sensor
bin 1 upper level sensor (2 parts)
bin 1 rear wall sensor

[benoba]

Re: wc 5890 with Finstacker bin home failure 311-461-00

Good morning, I am having the error above. I change firmware to 72.190.165.14201 and replace ejector.
I'm scratching my head, any help please!!!

Hello! How did you solve the problem? I have the same fault and I am desperate.


I have also changed the firmware and replace ejector.


I hope you can help me


thank you very much