Black copies on scans and copies thru ADF

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • COPYDOCAZ
    Trusted Tech

    100+ Posts
    • Mar 2015
    • 110

    #1

    [CQ] Black copies on scans and copies thru ADF

    prints are fine but some copies and scans are very dark, or completely blank when using the ADF, I replaced the exposure harness and checked the lamp position and it seems consistent. I also can't rely notice a fluctuation in lamp intensity. Still I get black copies about half the scans. and the scans are also very dark so I am sure the issue is with the exposure portion of the machine.If anyone has any suggestions on this I would appreciate it.
Working...