Oversized high capacity feeder lift cable

[lion_heart]

good day, anybody have any schematic or guide in installing the OHCF lift cables (4 - 2long and 2 short) the manual i have only shows HCF and doesn't explain the guiding process. I have 3 seemed to be correct, but one extra long one that i can't figure out what to do with. the part numbers are 012e10640 012e98330 012e98350 012e98360. any help would be great thanks

[InterfaceP]

Re: Oversized high capacity feeder lift cable

I have had to do this several times, what a pain in the a$$.

[lion_heart]

Re: Oversized high capacity feeder lift cable

I have had to do this several times, what a pain in the a$$.

lol agreed. any assistance with this long as cable? i still seem to have about 2 inches too much. What is the special route it must take? thanks

[Iowatech]

Re: Oversized high capacity feeder lift cable

I've only had to do that once, and that was a while ago, so I don't know how much help I'll be.
But is there any chance you could share a picture or two of what you're dealing with? It kind of stinks not being able to see what's going on there.

[lion_heart]

Re: Oversized high capacity feeder lift cable

I've only had to do that once, and that was a while ago, so I don't know how much help I'll be.
But is there any chance you could share a picture or two of what you're dealing with? It kind of stinks not being able to see what's going on there.

hope these pics help, thanks again.

[lion_heart]

Re: Oversized high capacity feeder lift cable

I've only had to do that once, and that was a while ago, so I don't know how much help I'll be.
But is there any chance you could share a picture or two of what you're dealing with? It kind of stinks not being able to see what's going on there.

This was a great help, hope this can assist somebody else, had to take all the parts out, didn't realize was one more bearing hiding behind everything.