[Error Code] re xerox wc 5325 machine

[Mukasa]

xerox making paper jams from all trays especially in two sided printing. one paper jams in the duplex side and the other on the registration area. shows error code 071-105, 072-105, 073-105 depending on the tray used

[Jake2o]

Re: re xerox wc 5325 machine

Check the inverter / duplex and exit section for debris or bits of paper.
As it does the same thing from all the standard paper tray we can rule out that pick-up section is the cause, error codes just reporting back the first paper that the sensors see.
How does it operate in simplex mode, run 10 - 20 single side sheets off, what happens?

[Mukasa]

Re: re xerox wc 5325 machine

For the simplex, it makes like 5- 6 copies and it jams passed the fuser or immediately after the fuser. Also sometimes it completes all the copies without jamming.
Have cleaned the registration sensor, the senor in duplex module,and the fuser exit sensor thinking that there may some in paper transport but all vain.

[Jake2o]

Re: re xerox wc 5325 machine

If it is intermittent and also occurs in simplex then go for the tray pick-up rollers.
Forget error codes or where it gets jammed unless the paper is scrunched up.
The machine only knows that a piece of paper hasn't got to a sensor in the time it expected it to, but it isn't intelligent enough to know which sensor that is and the first sensor to report back to the main board is the one it thinks triggered the jam.