Xerox Install-Deinstall Documentation on 4110 and related models...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kingpd@businessprints.net
    Senior Tech

    500+ Posts
    • Feb 2008
    • 919
    #1

    Xerox Install-Deinstall Documentation on 4110 and related models...

    Does anyone have the installation/deinstallation documentation for the Xerox 4110 and it's related copier/printer brethren e.g., 4590/4595/4112/4127/etc.,?


    It looks like the finisher probably just has some bolts to remove and I'm not sure how the wiring is setup if it's plug and play or not. Not sure yet what paper deck if any is attached.


    Thanks in advance.
    Tags: None
    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2383
      #2
      Re: Xerox Install-Deinstall Documentation on 4110 and related models...

      It is contained into edoc.

        Comment

        • kingpd@businessprints.net
          Senior Tech

          500+ Posts
          • Feb 2008
          • 919
          #3
          Re: Xerox Install-Deinstall Documentation on 4110 and related models...

          Originally posted by adriansto
          It is contained into edoc.
          I don't have the edoc.

            Comment

            • adriansto
              Service Manager

              Site Contributor
              VIP Subscriber
              1,000+ Posts
              • Nov 2007
              • 2383
              #4
              Re: Xerox Install-Deinstall Documentation on 4110 and related models...

              Originally posted by kingpd@businessprints.net
              I don't have the edoc.
              It is a must if you want to selfservice the machine.

                Comment

                • kingpd@businessprints.net
                  Senior Tech

                  500+ Posts
                  • Feb 2008
                  • 919
                  #5
                  Re: Xerox Install-Deinstall Documentation on 4110 and related models...

                  Originally posted by adriansto
                  It is a must if you want to selfservice the machine.
                  Do you happen to have it, or at least the install/deinstall pages?

                    Comment

                    • kingpd@businessprints.net
                      Senior Tech

                      500+ Posts
                      • Feb 2008
                      • 919
                      #6
                      Re: Xerox Install-Deinstall Documentation on 4110 and related models...

                      Solution: You don't need much to install/deinstall these. This has got to be about the easiest finisher to install/deinstall that I have ever done.

                      Steps to deinstall:

                      1. Unplug everything, power cords, data cables, etc.
                      2. Open the two front finisher doors.
                      3. SEE PHOTO: on the upper left side inside the finisher, remove the screw circled in red.
                      4. Pull the metal bar circled in blue towards you (that moves the locking mechanisms out of the way so the finisher can be pulled apart from the base machine. There's two attach hooks.
                      5. Make sure metal bar is pushed back in and put the screw circled in red back in so you don't lose it (keeps bar locked in place).
                      6. Close the doors of the finisher.

                      Xerox 4110 finisher remove.jpg

                      I got to admit the simplicity of this machine amazed me. I wasn't expecting such an easy first time. Even the touch display removal was quite simple.

                      If anybody else needs help on the install/deinstall, let me know.
                      Attached Files

                        Comment

                        Previous template Next
                        Working...