Looking for part number for a harness for 510 engineering machince manual don't list

[technogeek2009]

Re: Looking for part number for a harness for 510 engineering machince manual don't l

So far as I know, this harness is not spared by Xerox. This is the case for most of the wire harnesses in the 510 / 8850. However, we can sell you this harness. Please respond with an email to cbyrne@goevergreen.net

[xtrain]

Re: Looking for part number for a harness for 510 engineering machince manual don't l

service-manual.net has the 8850 wide format/510DP PDF Service manual/parts list, 446 pages for $12.99.

[Iowatech]

Re: Looking for part number for a harness for 510 engineering machince manual don't l

Is there any chance you can show us where that wiring harness would be found in that machine?
For what it is worth, I haven't worked on Xerox equipment long enough to be any sort of authority here. Still, for the variety of other equipment I've worked on before I got here, wiring harnesses are actually kind of hard to come by. The others expected me to be able to fix that sort of thing.
Sorry if this was a waste of time.

[mdm]

Re: Looking for part number for a harness for xerox 510/8850 machince manual don't l

I found out there is a similar machine to the xerox 510 that is the xerox 8850 may some one has manual and
can check the part number for me .

Thanks

[mdm]

IMG_20160524_162843.jpgIMG_20160524_162814.jpgIMG_20160524_162744.jpg

Good morning guys,

I am looking for a part number for a harness for the 510 engineering machine the manual does

show the part. The first picture shows the two connectors that connects to the main board in the

back of the machine. the second picture show the connectors tha connect to the drum motor and

erase lamps the third pictures shows the entire harness. seem like a short and some wires are burnt.

Please help.