We have a kit available to upgrade your 2045 to 2060 speed. As you've noticed, the 2045's are readily available, 2060's not so much so. Many of your service customers have 2045's in place and would like the additional production. You will need a PWS to install the kit, but otherwise it's a very straightforward business. It takes about an hour to complete.
Output increases from 2700 /Hr to 3600 /Hr
We are suggesting a cost to your customer of $2500. We are selling the kit to (you) the tech for $1500.
We also have the complete "converted" 2060 for sale at a fair price (actual price varies depending on meter, condition and cosmetics). These will probably not go back onto Xerox service. We can also do the conversion for you at the customer site. Cost varies with the actual cost of our travel to your site.
We can arrange shipment out of the US from both Miami and Los Angeles. Machines for export are palletized, covered with shrink film, and a light plywood box is built around the machine. We can also apply a fresh coat of paint if you desire.
We can -at the same time- upgrade machine software to the latest revision level, and upgrade Fiery or Creo software, if appropriate.
Please contact me directly for more information:
Output increases from 2700 /Hr to 3600 /Hr
We are suggesting a cost to your customer of $2500. We are selling the kit to (you) the tech for $1500.
We also have the complete "converted" 2060 for sale at a fair price (actual price varies depending on meter, condition and cosmetics). These will probably not go back onto Xerox service. We can also do the conversion for you at the customer site. Cost varies with the actual cost of our travel to your site.
We can arrange shipment out of the US from both Miami and Los Angeles. Machines for export are palletized, covered with shrink film, and a light plywood box is built around the machine. We can also apply a fresh coat of paint if you desire.
We can -at the same time- upgrade machine software to the latest revision level, and upgrade Fiery or Creo software, if appropriate.
Please contact me directly for more information:
Comment