7120 how to print out test patterns

[audyplongo]

im working on a 7120 and im not sure how to print out solid colors to test if there are any marks on the belt or if a developer/drum is no good, where can i go to print out these test patterns, i know for the 75 series you can hold down 0 then press start and go to diagnostics and print test patterns but not sure how to do it on the 7120 please help thanks in advance

[JrTech]

Re: 7120 how to print out test patterns

It is the same procedure as the 75 and 78 series. Press and hold 0 for 10 secs (says 5 but good luck) then press start button. Orange Screen will pop up. Enter the passcode and you want to navigate to Print Test Patterns - type in 059. Number 059 is a Full Halftone test pattern. This will tell you the issues you are having. Question but are you having an issue with Black or Cyan?

Hope this helps

[audyplongo]

Re: 7120 how to print out test patterns

It is the same procedure as the 75 and 78 series. Press and hold 0 for 10 secs (says 5 but good luck) then press start button. Orange Screen will pop up. Enter the passcode and you want to navigate to Print Test Patterns - type in 059. Number 059 is a Full Halftone test pattern. This will tell you the issues you are having. Question but are you having an issue with Black or Cyan?

Hope this helps

thank you i was able to find where the test pattern was and not sure if there is any issues with those colors just doing QC (Quality Control)

[Junio]

Re: 7120 how to print out test patterns

It is the same procedure as the 75 and 78 series. Press and hold 0 for 10 secs (says 5 but good luck) then press start button. Orange Screen will pop up. Enter the passcode and you want to navigate to Print Test Patterns - type in 059. Number 059 is a Full Halftone test pattern. This will tell you the issues you are having. Question but are you having an issue with Black or Cyan?

Hope this helps

What if there's no "screen" after ng "cin%"?