Xerox 242 jamming

[konicauser]

Hoping you guys can help.
Have a xerox here dc242. Low copy count
Have done a big run on 250GSM card gloss 1500 sra3 without any problems

Printing on 170GSM gloss now keeps jamming in fuser. Seems as though it is rippling the paper. Not going past the fuser

[Jake2o]

Re: Xerox 242 jamming

Hoping you guys can help.
Have a xerox here dc242. Low copy count
Have done a big run on 250GSM card gloss 1500 sra3 without any problems

Printing on 170GSM gloss now keeps jamming in fuser. Seems as though it is rippling the paper. Not going past the fuser

Error code please.
It may be that the fault lies in the pick up section rather than the fuser - Copy count really does not count for much at this point.
Try changing the fuser, do you have a high capacity feeder or are you using the normal bypass tray for SRA3?
What happens on normal paper from the trays A4 100gsm from tray 3 or 4?