Xerox 5765 altboot

[Zahid khan]

I copy this folder into sub and insert into Xerox sub port but altboot not work

[lilleputte]

Re: Xerox 5765 altboot

Try with another pendrive. AltBoot and then the DLM file insde the folder

[Zahid khan]

Re: Xerox 5765 altboot

i used 4 different pendrives

[Exok]

Re: Xerox 5765 altboot

What is wrong with your machine that you are attempting to do an AltBoot?
What is the software version that you are trying to install? (I can't read the screen in your photo, too small)

[Zahid khan]

Re: Xerox 5765 altboot

i am installing the same software already installed in machine.the machine does not copy only print.the scan copy on upper bar does not appear when I go to copy menu.it only beeps.

[Exok]

Re: Xerox 5765 altboot

Try a forced altboot.

On a thumb drive, create a folder named "altboot".
Inside the folder place the DLM file (machine software)
WorkCentre 5765/5775/5790 File Download

Link above is software available at xerox.com

Create a text file with no data in it.
Name the text file, "FORCED_UPGRADE" all caps just as it appears.
Remove the file extension from the text file, ".txt"
Place the FORCED_UPGRADE file in the "altboot" folder with the DLM file.

Power off the copier. Insert the thumb drive in one of the USB ports in the back of the copier.
Power the copier on. Your machine should enter "software upgrade" mode in a few minutes.

[andywong90]

Re: Xerox 5765 altboot

Hello best fren,u got wc 5665 pas diagnostic tool for upload nvm? Thanks

[andywong90]

Re: Xerox 5765 altboot

Pws diagnosic tool for upload nvm