I traded finishers on one of my 7675's as the old one wore out beyond being worth repairing.
Both the new and old finishers are SFN-3, the standard (not light production) Advanced Finisher (no booklet maker).
Unfortunately, the machine now will only all the 3000-sheet finisher tray half full before declaring it full. (With letter paper, not tabloid.)
I have had this happen before when swapping finishers, and there was an NVM I had to adjust, but I can't find it anywhere now.
I did find 763-1 (output type) which is set to "3", just like my other 7675's with SFN-3's which work fine. I also found 763-12 (BOOKLET DETECT) which is "0", since there isn't one, which is also what my others are.
Does anyone know how to make the machine realize this is the 3000-sheet stacker and not the booklet finisher?
Thanks!
-Ken
Both the new and old finishers are SFN-3, the standard (not light production) Advanced Finisher (no booklet maker).
Unfortunately, the machine now will only all the 3000-sheet finisher tray half full before declaring it full. (With letter paper, not tabloid.)
I have had this happen before when swapping finishers, and there was an NVM I had to adjust, but I can't find it anywhere now.
I did find 763-1 (output type) which is set to "3", just like my other 7675's with SFN-3's which work fine. I also found 763-12 (BOOKLET DETECT) which is "0", since there isn't one, which is also what my others are.
Does anyone know how to make the machine realize this is the 3000-sheet stacker and not the booklet finisher?
Thanks!
-Ken