Hi frends.
After moving, a 700, it does not boot !
black screen, no blinking led on the screen.
all the leds on ESS board are ok.
and by-pass not moving, same thing for tray 1 to 3
the screen panel is ok! (tested on another machine)
I think ESS board is dead.
What do you think ?
After moving, a 700, it does not boot !
black screen, no blinking led on the screen.
all the leds on ESS board are ok.
and by-pass not moving, same thing for tray 1 to 3
the screen panel is ok! (tested on another machine)
I think ESS board is dead.
What do you think ?
Comment