wc 7970 with 341-310

[apcrap]

i have a 7970 with a code 341-310 that is appearing when print jobs are sent not all the time .The print job shows processing than than the machine just reboots than the remaing jobs will prit out .So far i did a forced altboot with the newest firmware , initialized nvram on network controller and installed a new fax board (mod 1) updated .

[vodo]

Re: wc 7970 with 341-310

i have a 7970 with a code 341-310 that is appearing when print jobs are sent not all the time .The print job shows processing than than the machine just reboots than the remaing jobs will prit out .So far i did a forced altboot with the newest firmware , initialized nvram on network controller and installed a new fax board (mod 1) updated .

Have you ever thought of replace the MCU-PF PWB? This doesn't cost much.

[apcrap]

Re: wc 7970 with 341-310

no I have not but the rap is saying nvm corruption

[vodo]

Re: wc 7970 with 341-310

no I have not but the rap is saying nvm corruption

Replace, reload software then initilize NVM twice then reboot.

[vodo]

Re: wc 7970 with 341-310

i have a 7970 with a code 341-310 that is appearing when print jobs are sent not all the time .The print job shows processing than than the machine just reboots than the remaing jobs will prit out .So far i did a forced altboot with the newest firmware , initialized nvram on network controller and installed a new fax board (mod 1) updated .

Btw, forgot to tell youdo Force Altboot with Disable backup.

[apcrap]

Re: wc 7970 with 341-310

did the forced alt and disable what nvm to initilize ?