POS wc 3325 doc feed issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • COPYDOCAZ
    Trusted Tech

    100+ Posts
    • Mar 2015
    • 110

    #1

    POS wc 3325 doc feed issues

    This machine has 153000 prints I rebuilt the adf they call back and its now jamming on the exit of the slit glass,... catching on the exit guide. If I replace the hinges will that resolve this issue the hinges appear ok but the rear of the ADF seems to be higher than it should be
    any suggestions other than replace it with a real machine.
  • xeroxsharp
    Trusted Tech

    250+ Posts
    • Nov 2008
    • 270

    #2
    Re: POS wc 3325 doc feed issues

    Originally posted by COPYDOCAZ
    This machine has 153000 prints I rebuilt the adf they call back and its now jamming on the exit of the slit glass,... catching on the exit guide. If I replace the hinges will that resolve this issue the hinges appear ok but the rear of the ADF seems to be higher than it should be
    any suggestions other than replace it with a real machine.
    1- One of DADF hingles is bad, ( inspect left one first ).
    2- There are two solenoids on DADF drive ( simplex multipage feedeng will not work ok, duplex DADF not working )
    3- missing good cleaning DADF duplex rollers
    4- or,you did something wrong

    Comment

    Working...