WC5875 Fuser and Drum not compatible error

[ktxerox]

Dear All,
I am facing subjected problem most of the gives the error replace the R2 , R3 after few days of installation not completing there life. some time gives the error incompatible R2 , R3.

can any one help ?

[MrXerox]

Re: WC5875 Fuser and Drum not compatible error

Assuming they are the correct units for the speed machine you are working on, i have seen the IOT pwb cause that to happen. Replace the IOT and altboot.

[Mukasa]

Re: WC5875 Fuser and Drum not compatible error

Assuming they are the correct units for the speed machine you are working on, i have seen the IOT pwb cause that to happen. Replace the IOT and altboot.

Hello Mr xerox
You have the problem with the machine NVM
Get the Original NVM of 5875 and install it there your machine will stabilize.

[ktxerox]

Re: WC5875 Fuser and Drum not compatible error

Can you please share the NVM ?