WC5638 network scanning

[Guest]

Hi,

I bought recently a secondhand WC5638 v1 with network controller and network scanning enabled. A couple of weeks ago the battery died. After replacing the battery and correcting some NVM values the machine booted up again succesfully. Everything is OK but network scanning now seems to be lost (not installed). The previous owner did not keep NVM backup, and the enablement code is lost. Is there anything I can do to enable scanning?

Thank you

[prismtech]

Re: WC5638 network scanning

Hi,

I bought recently a secondhand WC5638 v1 with network controller and network scanning enabled. A couple of weeks ago the battery died. After replacing the battery and correcting some NVM values the machine booted up again succesfully. Everything is OK but network scanning now seems to be lost (not installed). The previous owner did not keep NVM backup, and the enablement code is lost. Is there anything I can do to enable scanning?

Thank you

Call Xerox or live without. Ive never seen anyone hack enablement codes.

Be thankful is does anything. Many time after this issue they will never print again. Its like switching the main PWB.

Sent from my SM-J120W using Tapatalk

[adriansto]

Re: WC5638 network scanning

What machine software version ?

[ngtech]

Re: WC5638 network scanning

software version 21.113.2.12