xerox wc 5755

[walidcharifi]

i have a xerox wc5755
- i replace toner......... problem qualite
help me plz
image in pdf

jpg.pdf

[prismtech]

Re: xerox wc 5755

i have a xerox wc5755
- i replace toner......... problem qualite
help me plz

Put the older toner back in.

Pray to the copier gods.

Sent from my SM-J120W using Tapatalk

[walidcharifi]

Re: xerox wc 5755

Put the older toner back in.

Pray to the copier gods.

Sent from my SM-J120W using Tapatalk

thanks

[walidcharifi]

Re: xerox wc 5755

Put the older toner back in.

Pray to the copier gods.

Sent from my SM-J120W using Tapatalk

how to clear
help me plz

[prismtech]

Re: xerox wc 5755

how to clear
help me plz

I do not understand what the failure is.

Are you using knock off toner?

Sent from my SM-J120W using Tapatalk

[prismtech]

Re: xerox wc 5755

Your picture is not attached.

Sent from my SM-J120W using Tapatalk

[walidcharifi]

Re: xerox wc 5755

Your picture is not attached.

Sent from my SM-J120W using Tapatalk

image in pdf

jpg.pdf

[walidcharifi]

Re: xerox wc 5755

hi fiends;
help me

[walidcharifi]

Re: xerox wc 5755

I do not understand what the failure is.

Are you using knock off toner?

Sent from my SM-J120W using Tapatalk

yes

[caffeinekid]

Re: xerox wc 5755

You will need to throw all of that generic/reused toner away, get genuine toner, replace the developer unit and calibrate.

[prismtech]

Re: xerox wc 5755

You will need to throw all of that generic/reused toner away, get genuine toner, replace the developer unit and calibrate.

This is the fix!

Asian knock off toner is a mix of shredded car tires and black shoe polish.

Sent from my SM-J120W using Tapatalk

[walidcharifi]

Re: xerox wc 5755

You will need to throw all of that generic/reused toner away, get genuine toner, replace the developer unit and calibrate.

thanks .
how to calibrate ????

[Jake2o]

Re: xerox wc 5755

Just repalce the developer module and developer material.
Follow service manual procedure for replacement and it will do all the calibration you need:-

1. Select dC131 location 09-271 developer age and reset to zero.
   
2. Perform the dC905 TC Sensor Calibration.
   
3. Perform ADJ 9.2 Image Quality Adjustment Routine.
   
4. If a new developer assembly is installed, reset the Developer count to zero in the HFSI feature screen. Refer to GP 17 High Frequency service Items.
   
   

[InterfaceP]

Re: xerox wc 5755

This is the fix!

Asian knock off toner is a mix of shredded car tires and black shoe polish.

Sent from my SM-J120W using Tapatalk

LMAO! Nice one!

[ChiChaK]

Re: xerox wc 5755

If you have stains such as splashed (as I can see on ur PDF) this is DRUM!
- open the drum and from the top side u can see the rubber which abuts drum .... is on some place seperated from drum...
change drum and I am sure 100%