I have a Phaser 8200, that "warms up" to "100%" and then the display says "warming up" and never comes to a ready status. I have reset the nvram, still no go. Any help or a place to dwnload the service manual would be helpful. Currently there is no code, but I do seem to recall that there was one, however, I could be wrong. I sold this machine many years ago and the customer returned it because of this issue. It has been in my used inventory for some time now, but if there is a fix, I would prefer to fix it rather than throw it away. Thanks in advance ... I trust you guys will come through as you have for me in the past.
Comment