Xerox 5790

[tbyabachwezi]

hallow guy, I have problem with one of my client machine it was taking too to power up, so I replaced system software with fresh on. now I'm getting any error of Machine ID error. I know it is a speed coz what shows on screen is 5775 not 5790. please help me how to solve that.

regards

[selig67]

Re: Xerox 5790

try this

Perform the following:

1. Enter dC131 NVM location 03-005 System Install Phase. Set the value to 2.
   
2. Exit diagnostics, then reboot the machine.
   
3. Re-run the install wizard. When requested, input the relevant activation code.[IMG]pws://file/XEROX/XPWS/data/comment/BUS_Note.gif[/IMG]
   NOTE:
   The activation code can be found on a label on the rear of the machine. A copier only machine will have DC 57XX in the top right corner of the label, a multi-function machine will have MF 57XX.
   
   
4. Complete the final actions, SCP 6.