Xerox 242 Fiery EX260 - very dark prints

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • paul_gmb
    Technician
    • May 2014
    • 33

    #1

    Xerox 242 Fiery EX260 - very dark prints

    Hello,

    We have a Xerox 242 with a bundled EX260 in which prints tend to come out very dark. This is especially a problem with digital photos. We tried calibrating and also tried manually reducing color levels inside of the machine.

    They seem to improve, but then a couple of hours later they go dark again.

    Has anyone had this issue before ?

    The problem is especially on digital photos.
  • adriansto
    Service Manager

    Site Contributor
    VIP Subscriber
    1,000+ Posts
    • Nov 2007
    • 2383

    #2
    Re: Xerox 242 Fiery EX260 - very dark prints

    Procedura MaxSetup din service mode.
    Inainte de asta o curatare generala a masinii si a filtrelor in special.

    Comment

    • paul_gmb
      Technician
      • May 2014
      • 33

      #3
      Re: Xerox 242 Fiery EX260 - very dark prints

      Originally posted by adriansto
      Procedura MaxSetup din service mode.
      Inainte de asta o curatare generala a masinii si a filtrelor in special.
      Mersi. Am facut asta, e mai deschis dar tot ramane putin inchis. Dar e adevarat ca nu am facut o curatare generala inainte.

      Comment

      • adriansto
        Service Manager

        Site Contributor
        VIP Subscriber
        1,000+ Posts
        • Nov 2007
        • 2383

        #4
        Re: Xerox 242 Fiery EX260 - very dark prints

        Compara o pagina de test data din masina din service mod cu una tiparita din Fiery.
        Densitatile trebuie sa fie apropiate. Verifica si setarile din Fiery.

        Comment

        • Jake2o
          Trusted Tech

          250+ Posts
          • Dec 2007
          • 325

          #5
          Re: Xerox 242 Fiery EX260 - very dark prints

          Originally posted by paul_gmb
          Hello,

          We have a Xerox 242 with a bundled EX260 in which prints tend to come out very dark. This is especially a problem with digital photos. We tried calibrating and also tried manually reducing color levels inside of the machine.

          They seem to improve, but then a couple of hours later they go dark again.

          Has anyone had this issue before ?

          The problem is especially on digital photos.
          Put a picture up of the internal test page 12 & 13 then we can see if it is RIP or machine

          Comment

          Working...