Xerox 75xx colour calibration and speed

[hamedzoro]

Hi all
I need the best software driver and best calibration to get best image quality ... when I print the quality not good it's dim I need it more bright ... I have Windows 7 64bit .

Other questions how I can change machine speed.

Thanks in advance all

[JrTech]

Re: Xerox 75xx colour calibration and speed

Good evening. Hopefully you are using Xerox supplies! There are only a few corrections that can be done, in the print driver there are settings under Color tab. As far as getting a "production" print off the machine it cannot be achieved as this machine is 1200 dpi vs 2400 found on Production machines.
As far as the speed, Yes you can change the speed with a PEK (Product Enablement Key). This can only be retrieved from Xerox IF MACHINE IS UNDER CONTRACT. This key tells machine speed, regional location and maint plan

Hope this helps

[hamedzoro]

Re: Xerox 75xx colour calibration and speed

Good evening. Hopefully you are using Xerox supplies! There are only a few corrections that can be done, in the print driver there are settings under Color tab. As far as getting a "production" print off the machine it cannot be achieved as this machine is 1200 dpi vs 2400 found on Production machines.
As far as the speed, Yes you can change the speed with a PEK (Product Enablement Key). This can only be retrieved from Xerox IF MACHINE IS UNDER CONTRACT. This key tells machine speed, regional location and maint plan

Hope this helps

Thanks for your reply
I need to know if you known another calibration that under tools button ?