WC 7535 HDD (generic ok?)

[buzz]

I have 5735 that was traded in by a customer and of course we pulled the hard drive, as requested, to leave with them. I'm wanting to power this baby up and I have a bunch of SATA hard drives here on my desk from old copiers.

Anyone know if the HDD needs to be formatted in a certain format, or could I pull one from Best buy down the street and would that work?

Thanks for any feedback!

[buzz]

Re: WC 7535 HDD (generic ok?)

I have 5735 that was traded in by a customer and of course we pulled the hard drive, as requested, to leave with them. I'm wanting to power this baby up and I have a bunch of SATA hard drives here on my desk from old copiers.

Anyone know if the HDD needs to be formatted in a certain format, or could I pull one from Best buy down the street and would that work?

Thanks for any feedback!

sorry its a 7535

[adriansto]

Re: WC 7535 HDD (generic ok?)

sorry its a 7535

You dont need to format the hdd neither create any partition on it.
After you connect the hdd on machine you will need to reload machine software - General Procedure nr 9 from service manual

[buzz]

Re: WC 7535 HDD (generic ok?)

thanks!
ok. luckily i printed a config page prior and received the exact version software.

I created a folder Altboot on my usb drive root. Created another file (txt) without the extension FORCED_UPGRADE. Loaded the dlm version software into the the Altboot folder too. Inserted thumb drive into USB slot (had to remove a small access cover on the control panel), and also tried inserting usb thumb drive at the rear usb.

Powered on the machine, and in about 40 seconds to a minute, the green screen goes blank (dark), and the machine turns off, and turns back on again, it repeats this about 3 or 4 times and eventually stays in the power off state. To me looks like the power supply shutting off? super weird.

Am I missing something?

Here's what it looks like:
Dropbox - 20171206_155243.mp4