[Misc] DC 250 no black on print, coppy ok

[sanimir]

DC 250 no black on print, after fiery instal print black all over the page, copy its ok.

Sugestion please

IMG_20180114_163400.jpgIMG_20180114_163354.jpgIMG_20180114_163614.jpg

[wtroll]

Re: DC 250 no black on print, coppy ok

Hi,
check connections between machine and Fiery.
Try to reseat connections into Fiery (ddram, video board....).
Try to reseat connections into machine controller (especially vsel board).
Eventually try to change the Fiery cable.
Good luck!

[sanimir]

Re: DC 250 no black on print, coppy ok

I try all this, only vsel board no.

Hi,
check connections between machine and Fiery.
Try to reseat connections into Fiery (ddram, video board....).
Try to reseat connections into machine controller (especially vsel board).
Eventually try to change the Fiery cable.
Good luck!

[sanimir]

Re: DC 250 no black on print, coppy ok

Problem its in the Fiery.

I try all this, only vsel board no.

[sanimir]

Re: DC 250 no black on print, coppy ok

No error on rip display (00), al conection tested and ok, 2 green led working on card, but no black on print, 3 new disk, conectors and pins blow with compresed air, i reset motherboard and same isue.
i put second rip and work fine.