Xerox Workcentre 4250 Screen flashes red then fades to white on turn on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • srulie
    • May 2025
    #1

    Xerox Workcentre 4250 Screen flashes red then fades to white on turn on

    Xerox Workcentre 4250 Cycles then screen flashes red then fades to white on turn on. Any suggestions much appreciated.
    Tags: red, turn, white, xerox
    • Flash
      Trusted Tech

      250+ Posts
      • May 2007
      • 378
      #2
      Re: Xerox Workcentre 4250 Screen flashes red then fades to white on turn on

      Take the hard drive out and see if it will boot up. If it does you have a bad hard drive.

        Comment

        • srulie
          #3
          Re: Xerox Workcentre 4250 Screen flashes red then fades to white on turn on

          Reseated the ribbon cable going to display and all good now thanks

          Originally posted by Flash
          Take the hard drive out and see if it will boot up. If it does you have a bad hard drive.

            Comment

            Previous template Next
            Working...