workcentre m118 display blacl

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • axyun
    Service Manager

    Site Contributor
    1,000+ Posts
    • Aug 2007
    • 1323
    #1

    workcentre m118 display blacl

    workcentre display is black but machine works. Is the display available by itself. I saw whole control panel 802K66230 in service manual. Just got call today

    and have not seen machine yet. Cusomer under contract. Any info is appreciated. Frank
    Tags: call, display, today, workcentre
    • axyun
      Service Manager

      Site Contributor
      1,000+ Posts
      • Aug 2007
      • 1323
      #2
      Re: workcentre m118 display blacl

      ​If control panel is needed anyone with a good used unit . Is display available separately?

        Comment

        • axyun
          Service Manager

          Site Contributor
          1,000+ Posts
          • Aug 2007
          • 1323
          #3
          Re: workcentre m118 display blacl

          Went to customer yesterday and screen is not black. It is a blank screen. I removed control panel and checked connectors and reinstalled. The

          screen came back and was okay for about a couple of minutes and then went blank again. I turned off and pulled plug. When I turned on it was

          normal again but went blank after a couple of minutes. Frank

            Comment

            Previous template Next
            Working...