C75 ADJ 7.6 screen

[Jake2o]

Does anybody know how to get to the side 1/side 2 alignment adjustment screen for ADJ 7.6 on a Xerox C75. I can't find it in System Registration. I have a picture of it in the edoc, but cannot find it.

Thanks.

[InterfaceP]

Re: C75 ADJ 7.6 screen

1. Power on the copier/printer, while holding down the 0 (zero), 1, and 3 buttons

[Jake2o]

Re: C75 ADJ 7.6 screen

That just calibrates the touchscreen. What I need to know is how to navigate to the screen shown in figure 2 of the ADJ7.6 in the edoc "Side 1 / Side 2 Registration"

Thanks.

[InterfaceP]

Re: C75 ADJ 7.6 screen

That's not a screen shot of the UI, it's a pic of the printout you make when making the adjustment. Unfortunately its not that easy.

You will need 2 things: A metric ruler at least the length of an 11x17 sheet and lots of patience. Make the measurements and input them where the Edoc states.