Xerox Phaser 7400

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • techspec
    Trusted Tech

    100+ Posts
    • Dec 2008
    • 128

    #1

    Xerox Phaser 7400

    Hi there, can anyone out there supply me with a part number for the ribbon cable that connects to the ops panel.
  • tech1569
    Senior Field Technician
    • Oct 2006
    • 71

    #2
    Phaser 7400

    Originally posted by techspec
    Hi there, can anyone out there supply me with a part number for the ribbon cable that connects to the ops panel.


    There is no part number for this cable the diagram showing it is on page 637 of the manual. These cables and others come included with a parts kit or service kit for this model. In the the past I was able to use a similar 6 pin cable from another phaser or even this model even though the cable length was longer.

    Comment

    • techspec
      Trusted Tech

      100+ Posts
      • Dec 2008
      • 128

      #3
      Do you have part number for service kit. Thanks in advance

      Comment

      • tech1569
        Senior Field Technician
        • Oct 2006
        • 71

        #4
        Originally posted by techspec
        Do you have part number for service kit. Thanks in advance
        There is no part number for that service kit , you order a Harness service kit for that particular model. Most service kits do not have part numbers while others do.

        The packing list shows this number for the kit but check on it just in case:

        604K40950
        Last edited by tech1569; 12-09-2008, 12:49 AM.

        Comment

        Working...