Fuji Xerox DocuCentre-V C2265 not recognising lower paper trays

[biggsy]

Hi, we have installed a couple of years ago at the time the customer had ordered the machine on a 3 drawer stand, but decided to put the machine on a desk instead. Now they have moved the machine so we have put it on the 3 drawer stand, unfortunately their machine only recognises the original tray and the first tray of the 3 drawer stand - not the other 2 drawers. I'm thinking there must be something in the initial setup to tell it of the other drawers. Any ideas?

TIA Nigel

[Dech]

Re: Fuji Xerox DocuCentre-V C2265 not recognising lower paper trays

hi

Check and change your NVM:

742-205 =

0- 1tm
1-3tm
2-2ttm (3 level}
3- SRA3_3TM
4- 2TM
5-2TTM(2 level)
6- STM

Your should probably be on 1 ...

[biggsy]

Re: Fuji Xerox DocuCentre-V C2265 not recognising lower paper trays

hi

Check and change your NVM:

742-205 =

0- 1tm
1-3tm
2-2ttm (3 level}
3- SRA3_3TM
4- 2TM
5-2TTM(2 level)
6- STM

Your should probably be on 1 ...

Thanks Dech, that fixed it!!

Cheers