xerox 700 print smudge / displacement.

[mloki]

Hi all,

My xerox 700 was printing fine until it printed the following image. All prints come out the same since then. Just seeing if anyone has had this issues or can help me fault find it. Cheers.

Bball.jpg

[Phil B.]

Re: xerox 700 print smudge / displacement.

Hi all,

My xerox 700 was printing fine until it printed the following image. All prints come out the same since then. Just seeing if anyone has had this issues or can help me fault find it. Cheers.

[ATTACH=CONFIG]43806[/ATTACH]

looks like your fuser or belt are fucked
but with out pages counts supply counts .. pm cycles.. I'm only pissin in the wind

you really don't give us shit to work with

[mloki]

Re: xerox 700 print smudge / displacement.

Hi Phil,

I've tried two fusers and just had the IPB belt replaced about a month ago and have printed about 500, 40 page full colour booklets without an issue. I'll get back to you with a page count. I have a third fuser which I have not tried, so I'll give it a shot.


Yes mate, it was the fuser.....