If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does anyone know if the memory on the bustled RIP (Docucolor 250) is upgradeable using off the shelf memory? It looks like it's standard 240 pin DIMM's but won't boot with some extra memory I had with me.
Was also curious about this, wondering if the fiery software would lock the memory to the installed amount or if it could be upgraded by simply installing a dimm in the open slot.
Comment