DC_250 Fiery Reload Software v1.1 6e

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rusty Wood
    Technician
    • Oct 2019
    • 11
    #1

    DC_250 Fiery Reload Software v1.1 6e

    Hi,

    I would like to install Fiery System onto a new hard drive for my DC 250.

    Installed is V1.1 6e on a X3eTY.

    Does anyone have instructions or know where I might be able to find this.

    I've been searching all day..

    Thanks

    Rusty
    Tags: fiery, instructions, rusty, v1.1, x3ety
    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2329
      #2
      Re: DC_250 Fiery Reload Software v1.1 6e

      Send me photo with the white label with 3 serial numbers printed on it.
      The label is located at the top of the Fiery cage.
      My mail = stoadis@gmail.com

        Comment

        • Rusty Wood
          Technician
          • Oct 2019
          • 11
          #3
          Re: DC_250 Fiery Reload Software v1.1 6e

          Originally posted by adriansto
          Send me photo with the white label with 3 serial numbers printed on it.
          The label is located at the top of the Fiery cage.
          My mail = stoadis@gmail.com
          Hi adriansto,

          Thanks very much for your help .. I have just emailed you.

          Regards

          Rusty

            Comment

            • Rusty Wood
              Technician
              • Oct 2019
              • 11
              #4
              Re: DC_250 Fiery Reload Software v1.1 6e

              Originally posted by adriansto
              Send me photo with the white label with 3 serial numbers printed on it.
              The label is located at the top of the Fiery cage.
              My mail = stoadis@gmail.com
              Hi, how do I obtain the patches ..

              Thanks

              Rusty

                Comment

                • Rusty Wood
                  Technician
                  • Oct 2019
                  • 11
                  #5
                  Re: DC_250 Fiery Reload Software v1.1 6e

                  Originally posted by adriansto
                  Send me photo with the white label with 3 serial numbers printed on it.
                  The label is located at the top of the Fiery cage.
                  My mail = stoadis@gmail.com
                  Hi Adrian, I was able to get hold of V1.2 install discs.

                  Thanks for your help.

                    Comment

                    • Caffeine
                      Trusted Tech

                      Site Contributor
                      250+ Posts
                      • Feb 2008
                      • 382
                      #6
                      Re: DC_250 Fiery Reload Software v1.1 6e

                      Originally posted by Rusty Wood
                      Hi Adrian, I was able to get hold of V1.2 install discs.

                      Thanks for your help.
                      That's good, because v1.2 is also System 8e Release 2. A great improvement over 6e, in my opinion.

                        Comment

                        • rishadmohamed
                          Technician
                          • Jan 2020
                          • 22
                          #7
                          Re: DC_250 Fiery Reload Software v1.1 6e

                          Originally posted by Rusty Wood
                          Hi Adrian, I was able to get hold of V1.2 install discs.

                          Thanks for your help.
                          Good Afternoon ,

                          i am looking for version 1.2 of this software as well. Can you assist with sharing.

                          Thanks
                          Asif.

                            Comment

                            • Phil B.
                              Field Supervisor

                              10,000+ Posts
                              • Jul 2016
                              • 22808
                              #8
                              Re: DC_250 Fiery Reload Software v1.1 6e

                              Originally posted by rishadmohamed
                              Good Afternoon ,

                              i am looking for version 1.2 of this software as well. Can you assist with sharing.

                              Thanks
                              Asif.
                              you have posted in TWO different Fiery software threads...

                              both for different models

                              what model of fiery and machine....

                              or are you just getting ALL fiery software?

                              becoming a CONTRIBUTOR might help in your quest

                                Comment

                                Previous template Next
                                Working...