C2265 V wearing out black developer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Drcopy
    Technician

    50+ Posts
    • Jan 2017
    • 57
    #1

    C2265 V wearing out black developer

    Hi,

    I have problematic machine where the black developer is depleted we have replaced 2 developers (housing & powder), but after 2 weeks customer calls saying blank prints.

    Has anyone come across a fix for this?
    Tags: black, blank, calls, developer, prints
    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22808
      #2
      Re: C2265 V wearing out black developer

      Originally posted by Drcopy
      Hi,

      I have problematic machine where the black developer is depleted we have replaced 2 developers (housing & powder), but after 2 weeks customer calls saying blank prints.

      Has anyone come across a fix for this?
      using OEM Genuine Xerox Toner/Dev powder?

      was it all spilled inside?

      pages counts on PM parts?

      did you run calibration on the parts after replacement?

      printed pages feel gritty?

      you really didn't give us squat to go on.

        Comment

        • Drcopy
          Technician

          50+ Posts
          • Jan 2017
          • 57
          #3
          Re: C2265 V wearing out black developer

          Originally posted by Phil B.
          using OEM Genuine Xerox Toner/Dev powder?
          was it all spilled inside?

          pages counts on PM parts?

          did you run calibration on the parts after replacement?

          printed pages feel gritty?
          using OEM Genuine Xerox Toner/Dev powder? yes OEM on both.

          was it all spilled inside?No, clean inside device.

          pages counts on PM parts? they are all below 50% life used.

          did you run calibration on the parts after replacement? Yes.

          printed pages feel gritty? yes it does when there is a little trace of black on the output prints.

            Comment

            • Phil B.
              Field Supervisor

              10,000+ Posts
              • Jul 2016
              • 22808
              #4
              Re: C2265 V wearing out black developer

              Originally posted by Drcopy
              using OEM Genuine Xerox Toner/Dev powder? yes OEM on both.

              was it all spilled inside?No, clean inside device.

              pages counts on PM parts? they are all below 50% life used.

              did you run calibration on the parts after replacement? Yes.

              printed pages feel gritty? yes it does when there is a little trace of black on the output prints.
              Sounds like td sensor is wacked

              What bias reading are recorded?

              Sent from my SM-G960U using Tapatalk

                Comment

                • EAHG
                  Technician
                  • Jan 2020
                  • 20
                  #5
                  Re: C2265 V wearing out black developer

                  Seito family's annoying problem....could be 3 components.

                  1. IBT's hvps.
                  2. Developer housing out of position.
                  3. HVPS pwb (left side when you take out the cover).

                  hope this can be of any help mate cheers...

                    Comment

                    Previous template Next
                    Working...