[Misc] cyan colour misregistration on wc 7345

[angurajdev]

respected sir, we have no knwledged service engineer in my area include me.. i have changed ibt belt new unit.. and change ros unit. and changed all drum and developer units...and diagnose all registration process and max setup process and all.. no improvement... not changing mob sensor only. but clean very well. first of all i said why this problem started in my machine..
1.first error code 004.346
2. belt torn.. so i changed it new.
3. again error code 004-346. so searched the internet. some one says initialise IOT. SO I would.
4. then error clear.
5. but this cyan colour mis alignment started..really i m very worry.
6.this is new machine. please rectify sollution.l
7. if problem created the ioT initilise,, i try to upgrade firmware. but the machine refused to upgrade)2016-11-24 16.46.23.jpg

[rafiqm4]

Re: cyan colour misregistration on wc 7345

respected sir, we have no knwledged service engineer in my area include me.. i have changed ibt belt new unit.. and change ros unit. and changed all drum and developer units...and diagnose all registration process and max setup process and all.. no improvement... not changing mob sensor only. but clean very well. first of all i said why this problem started in my machine..
1.first error code 004.346
2. belt torn.. so i changed it new.
3. again error code 004-346. so searched the internet. some one says initialise IOT. SO I would.
4. then error clear.
5. but this cyan colour mis alignment started..really i m very worry.
6.this is new machine. please rectify sollution.l
7. if problem created the ioT initilise,, i try to upgrade firmware. but the machine refused to upgrade)[ATTACH=CONFIG]44940[/ATTACH]

try to clean mob sensor left side of machine beneath IBT belt, u need to remove fixing unit

[rafiqm4]

Re: cyan colour misregistration on wc 7345

Clean the mob censor and check again it should solve your problem